Product ID:THIXON P-6-3
MSDS Date:03/05/1991
FSC:8040
NIIN:00N023406
MSDS Number: BQBFX

MORTON INTERNATIONAL

10 SOUTH ELECTRIC ST
WEST ALEXANDRIA, OH 45381
US

Emergency Phone: 513-839-4612;800-424-9300(CHEMTREC)

Info Phone: 513-839-4612

Preparer: J. D. BONFIGLIO

Cage: DO471

MORTON INTL INC SPECIALTY CHEMICALS GROUP

CHICAGO, IL 60606-1218 US

Telephone: 312-807-2000

Cage: 32063

CYCLOHEXANE

CAS: 110-82-7

RTECS: GU6300000

Fraction By Weight: 15%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SOLVENT NAPHTHA (PETROLEUM), MEDIUM ALIPHATIC; (NAPHTHOL

CAS: 64742-88-7

Fraction By Weight: 12%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

2-PENTANONE,4-METHYL-; (METHYL ISOBUTYL KETONE)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 4%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

RESORCINOL

CAS: 108-46-3

RTECS: VG9625000

Fraction By Weight: 4%

OSHA PEL 10 PPM;20 PPM STEL

ACGIH TLV: 10 PPM;20 PPM STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

HIGH FLASH NAPHTHA; (SUPER HIGH FLASH NAPHTHA)

CAS: 64742-95-6

Fraction By Weight: 4%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM

LEAD; (NON-WATER SOLUBLE LEAD COMPOUND)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 3%

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.15 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

SILICONE DIOXIDE, AMORPHOUS; (AMORPHOUS SILICA)

CAS: 7631-86-9

Fraction By Weight: 1%

OSHA PEL 5 MG/M3; 15 MG/M3

ACGIH TLV: 10 MG/M3

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 1 - 5%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

INGREDIENTS 12-14 NON-REGULATED MATERIALS

RTECS: 9999999ZZ

SYNTHETIC POLYMER

Fraction By Weight: 12%

PIGMENT

Fraction By Weight: 3%

CURATIVE

Fraction By Weight: 3%

TOLUENE CAS#108-88-3 APPEARS ON THE NAVY

RTECS: 9999999ZZ

HLTH PROFESSIONALS CONCERN LATEST HAZ LIST INFO &

RTECS: 9999999ZZ

2-BUTANONE; (METHYL ETHYL KETONE)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 26%

OSHA PEL 200 PPM;300 PPM STEL

ACGIH TLV: 200 PPM;300 PPM STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WARNING! PROD IS HARMFUL IF INHALED.
IT MAY CAUSE DIZZ/HDCH/NAUS/AS WELL AS NOSE/THROAT/SKIN/EYE IRRIT.
METHYL ETHYL KETONE MAY CAUSE PERIPHERAL NEUROPATHY W/POSS NUMB &
TINGLING IN EXTREMITIES. DEL M ISUSING MEK MAY CAUSE PERM DAM TO
BRAIN/CNS. MINOR EMBRYO-TOX EFT HAVE BEEN RPT IN LAB ANIMALS EXPOS
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLT HAZ:TO HIGH CONC OF MEK. METHYL ISOBUTYL
KETONE MAY CAUSE PERIPHERAL NEUROPATHY, W/POSS TINGLING/NUMB IN
EXTREM. TOLUENE MAY CAUSE NERV SYS DEPRESS & IMPAIRED LUNG FUNC.
OVEREXP TO TOLUENE MAY CAU SE DAM TO LIVER, LUNG, SPLEEN, CNS,
BRAIN. LEAD MAY DAM BLOOD FORM ORGANS/CNS/URINARY TRACT,
BRAIN/KIDNEYS. (SUPP DATA)
Medical Cond Aggravated by Exposure:SOLVENTS MAY AGGRAVATE PRE-EXISTING
HEART AND RESPIRATORY DISORDERS AS WELL AS ORGANS NAMED ABOVE.

First Aid:SKIN: FOR DIRECT CONTACT, REMOVE CLOTHING. WASH AFFECTED SKIN
WITH SOAP AND WATER. EYES: IRRIGATE EYES THOROUGHLY WITH WATER FOR
AT LEAST 15 MIN. INHAL: IF AFFECTED PERSON IS UNCONSCIOUS, REMOVE
TO FR ESH AIR AND ADMINISTER CPR/O*2 AS INDICATED. INGEST: CALL MD
IMMED .

Flash Point Method:CC
Flash Point:20.0F,-6.7C
Lower Limits:1.0%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, OR FOAM
EXTINGUISHERS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT IN CLOSED OR CONFINED AREAS.
Unusual Fire/Explosion Hazard:THIS MATERIAL IS CONSIDERED A FIRE HAZARD
DUE TO ITS FLASH POINT, HIGH VOLATILITY AND POTENTIAL HEAVY VAPORS.

Spill Release Procedures:ELIMINATE ALL IGNIT SOURCES. ABSORB MATL
W/VERMICULITE OR OTHER SUITABLE ABSORB MATL. USE APPRVD WASTE DISP
METH. UNDER EPA-CERCLA/SARA, MATERIAL WHICH IS RELEASED INTO
ENVIRONMENT IN AN AMOUNT ABOVE RQ(REPORTABLE QTY) MUST BE
REPORTED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP THIS MATL AWAY FROM
HEAT/SPARKS/OPEN FLAME. AVOID BREATHING VAPORS FOR A PROLONGED
PERIOD OF TIME. AVOID CONTACT TO SKIN. DO NOT TAKE INTERNALLY.
Other Precautions:WHEN USING FLAMMABLE MATERIALS, GROUND CONTAINERS YOU
ARE USING TO AVOID STATIC DISCHARGE WHICH COULD IGNITE SOLVENTS
CONTAINED IN FLAMMABLE MATERIALS. DO NOT ALLOW FREE FALL OF MORE
THAN FEW INCHES W HEN POURING FLAMMABLE MATERIALS.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS, SUCH AS
SCBA OR GAS MASKS.
Ventilation:LOCAL EXHAUST/MEC(GEN): AS REQUIRED TO MAINTAIN A LEVEL
BELOW TLV/PEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG OR FULL LNGHT FSHLD.
Other Protective Equipment:NOT USUALLY REQUIRED.
Work Hygienic Practices:REFRAIN FROM EATING OR SMOKING IN AREA WHERE
THIS MATERIAL IS BEING USED.
Supplemental Safety and Health
EFTS OF OVEREXP:LEAD MAY CAUSE DAM TO FETUS AS LEAD CROSSES PLACENTA.
RESORCINOL MAY CAUSE SKIN IRRIT/GI IRRIT & CAN CAUSE DAM TO SPLEEN,
LIVER, KIDNEYS, HEART, LUNGS. RESORCINOL CAN BE SENSITIZER & I S
CORROSIVE TO EYES. REPORTS HAVE ASSOCIATED RPTD/PRLNG OVEREXP TO
SOLVENTS WITH PERM DAM TO BRAIN AND CNS.(ING 15)

HCC:F3
Boiling Pt:B.P. Text:174F,79C
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:75

Stability Indicator/Materials to Avoid:YES
UNKNOWN. FOLLOW GUIDELINES FOR DILUTION WHICH APPEAR ON THE TECHNICAL
BULLETIN.
Stability Condition to Avoid:EXPOSURE TO HIGH TEMPERATURES FOR
PROLONGED PERIOD MAY GEL THIS PRODUCT RENDERING IT USELESS.
Hazardous Decomposition Products:POTENTIAL FOR CO, CO*2, AND POSSIBLE
HALOGENATED COMPOUNDS.

Waste Disposal Methods:INCINERATE MATERIAL EITHER AS HAZARDOUS
FLAMMABLE LIQUID WASTE OR HAZARDOUS FLAMMABLE SOLID WASTE,
DEPENDING ON PHYSICAL STATE OF THE MATERIAL. DISPOSAL MUST BE IN
ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.